Node Maintenance Schedule

A simple maintenance schedule keeps your node reliable and avoids the surprise of a failed battery or corroded antenna during an emergency. Regular checks take 10-15 minutes per node and catch most common failure modes early.

Safety note - work at height: Rooftop and mast work involves fall hazards. Use a properly footed ladder (maintain 3-point contact), avoid wet/icy roofs, never work at height alone, and consider binoculars or a camera pole for visual checks that do not require touching the node. If the node is on a tower, leave climbing to trained/certified climbers.

Monthly Checks (5 minutes)

Quarterly Checks (15 minutes)

Annual Checks (30-60 minutes)

Maintenance Log Template

Keep a simple maintenance log for each node:

Node: WH01-WestHillsRepeater
Node ID: !ab12cd34
Location: 3214 Hill Ave rooftop
Last firmware: 2.6.1 (updated 2026-03-15)
Battery: LiFePO4 20Ah (installed 2025-06)

Maintenance Log:
2026-05-01: Quarterly check. RSSI to Summit -87dBm (baseline -85), within normal.
 Enclosure dry. Antenna secure. FW up to date.
2026-02-01: Quarterly check. Updated FW from 2.5.9 to 2.6.1.
 Backed up config. Checked solar: 13.8V at noon, good.
2025-11-01: Annual check. Replaced self-amalgamating tape on N connector.
 Cleaned solar panel (bird droppings). Battery 98% capacity.

Revision #4
Created 2026-05-03 06:47:29 UTC by Mesh America Admin
Updated 2026-06-08 19:55:56 UTC by Mesh America Admin