Meshtastic Device Compatibility Meshtastic Device Compatibility Meshtastic is the other major firmware option for LoRa mesh nodes. Hardware compatibility overlaps significantly with MeshCore. Always verify at flasher.meshtastic.org before purchasing. Widely Used Meshtastic Devices Device MCU Price Range Notes Heltec V3 ESP32-S3 + SX1262 $20 - $30 Very common; large community Heltec V4 ESP32-S3 + SX1262 $25 - $35 ~22 dBm TX (confirm against Heltec's current spec; some sources cite a higher-power variant). Both V3 and V4 use the SX1262 - any difference is not a clear datasheet-supported power increase. LilyGo T-Beam ESP32 $35 - $45 GPS; popular for mobile nodes LilyGo T-Deck ESP32-S3 $43 - $53 Standalone keyboard device LilyGo T-Echo nRF52840 $50 - $65 Long battery life RAK4631 (WisBlock) nRF52840 + SX1262 Varies Modular; add GPS/sensor modules SenseCAP T1000-E nRF52840 + LR1110 $35 - $45 GPS, IP65, compact (radio is Semtech LR1110, not SX1262) Heltec T114 nRF52840 + SX1262 $30 - $45 TFT display; lower power Prices are approximate retail ranges as of 2026-06-08 and are volatile; check a current retailer (e.g. the manufacturer's store, Rokland, or Seeed Studio) before buying. Choosing Between MeshCore and Meshtastic Factor MeshCore Meshtastic Community size Smaller, growing Very large, well-documented Room server support Yes (built-in variant) Via MQTT bridge App ecosystem MeshCore app (Android/iOS) Meshtastic app (Android/iOS/web) Repeater setup Simple, dedicated variant Router role in settings Firmware updates OTA via app or web flasher OTA via app or web flasher Both firmware options run on the same hardware. You can re-flash between them at any time without permanent consequences - choose based on the network you are joining or building.