Prebuilt Solar Repeater Units

Prebuilt Solar Repeater Units 
 Prebuilt solar nodes take the complexity out of outdoor deployments. They arrive weather-rated, often pre-flashed, and ready to mount. The trade-off is higher cost compared to a DIY build. 

 RAK WisMesh Repeater - $129 
 IP67-rated enclosure with 5.2Ah battery and pre-flashed MeshCore repeater firmware. Designed specifically for unattended outdoor deployment. Mount it, point the solar panel, and it runs. 
 
 IP rating: IP67 
 Battery: 5.2Ah 
 Firmware: MeshCore (pre-flashed) 
 Solar: External panel required (sold separately) 
 

 RAK WisMesh Repeater Mini - $69 
 A smaller, lower-cost version of the WisMesh Repeater. IP65 rated with a 2000mAh battery. Good starting point for a solar site where you want a prebuilt option without the full Repeater cost. 

 SenseCAP Solar Node P1 - $69.90 
 Integrated solar panel in the housing. No external battery included - you add your own 18650 cells. Low entry cost if you already have cells. 

 SenseCAP Solar Node P1-Pro - $89.90 
 The community's top recommendation for outdoor MeshCore repeaters per RegionMesh . Includes built-in GPS, capacity for 4x 18650 cells, and an integrated solar panel. Ships with MeshCore firmware. The GPS enables position reporting from the repeater itself. 
 
 GPS: Yes 
 Battery capacity: 4x 18650 (cells not included) 
 Solar: Integrated 
 Firmware: MeshCore (pre-flashed) 
 Community rating: "Best choice for outdoor MeshCore repeaters" - RegionMesh 
 

 Atlavox Beacon - $235.99 
 Premium solar repeater with a 5W ETFE solar panel, 5000mAh battery, and IP67 rating. ETFE panels are more durable and efficient than standard PET-laminated panels, making this a good long-term investment for critical sites. 

 Atlavox Beacon Outpost - $269.99 
 Same hardware as the Beacon but comes pre-flashed and pre-configured, with an ALFA antenna included. Zero-setup deployment - unbox, mount, done. 

 PEAKmesh Solar Nodes - $99+ 
 Community-built nodes rated for 30+ days of runtime. Available in birdhouse and tree-hang form factors - useful for natural environments where a standard enclosure would look out of place or draw attention. 

 Yeti Wurks Base Station - $99+ 
 IP65-rated, pre-configured. Yeti Wurks also offers a solar kit ($150) that bundles the base station with a 5.5W solar panel - a convenient all-in-one purchase for a new solar site. 

 Seeed MeshCore Starter Kit - $132.80 
 Bundles a SenseCAP P1-Pro (solar node/repeater) with a Wio Tracker L1 Pro (handheld/carry device), both pre-flashed with MeshCore. The most convenient way to get both an infrastructure node and a personal device in one purchase. 

 Prebuilt Solar Node Comparison 
 
 Device Price Battery IP Rating Solar Included Pre-flashed GPS 
 
 RAK WisMesh Repeater $129 5.2Ah IP67 No Yes No 
 RAK WisMesh Repeater Mini $69 2000mAh IP65 No No No 
 SenseCAP P1 $69.90 18650 (DIY) Yes Yes No No 
 SenseCAP P1-Pro $89.90 4x 18650 (DIY) Yes Yes Yes Yes 
 Atlavox Beacon $235.99 5000mAh IP67 5W ETFE Yes No 
 Atlavox Beacon Outpost $269.99 5000mAh IP67 5W ETFE Yes (configured) No 
 PEAKmesh Solar Nodes $99+ 30+ day rated Yes Yes Yes Varies 
 Yeti Wurks Base Station $99+ - IP65 Optional ($150 kit) Yes No