๐ Start Here โ MeshCore Repeaters Guide
This book covers everything about deploying MeshCore REPEATER firmware nodes - from choosing a site to building the hardware, configuring the firmware, and troubleshooting problems.
๐ Where to Start
- What is a MeshCore Repeater? - Role in the network explained
- Choosing a Repeater Location - Site selection principles
- Then choose a build path: Budget build (~$60) or Pro solar build (~$217) (approximate component totals as of June 2026; hardware prices vary by vendor and over time โ check the linked build pages and current vendor listings before ordering)
๐ What's In This Book
Planning and Site Selection
- Choosing a Repeater Location
- Antenna Selection and Mounting
- Planning a MeshCore Community Network
- Repeater Density and Coverage Calculations
Hardware Builds
- Budget MeshCore Repeater: Under $60
- Pro MeshCore Solar Repeater: Complete Build
- Hardware Considerations
- Power and Solar Systems
Configuration
- Flashing Repeater Firmware
- Radio Settings and Presets
- Advertisements and Discovery
- MeshCore Repeater Name and Identity
- Multi-Repeater Network Coordination
Network Design and Expansion
- Room Servers & Gateways - Placement strategy and adding a room server to your repeater site (covered in the dedicated Room Servers & Gateways book)
- When to Add a Repeater vs. When to Move One
- Linking Isolated Mesh Islands
- MeshCore vs Meshtastic: Choosing for Your Community
Troubleshooting
- Diagnosing MeshCore Repeater Problems
- Advanced MeshCore Repeater Diagnostics
- Reflashing and Factory Reset
โก๏ธ Related Books
- MeshCore - Protocol, firmware, and app guide
- Room Servers & Gateways - Adding a room server to your repeater site
- Solar & Power Systems - Powering outdoor repeaters
- Antennas & RF - Antenna selection and installation