Heltec Mesh Node T096
Overview
The Heltec Mesh Node T096 was(Heltec's announcednRF52 onpart Aprilnaming 20,follows 2026,the atHT-n5262 $29.90./ ItHT-n5262M family) combines an nRF52840 MCU with an SX1262 radio and an integrated power amplifier. deliveringHeltec 28rates dBmits maximum TX power -at matching28±1 dBm via that PA — well above the HeltecSX1262's V3/V4bare innative output+22 whiledBm adding— which it pairs with on-board GPS and an ultra-low sleep currentcurrent, that makesmaking it purpose-built for solar and remote deployments. (TX-power figures for Heltec PA boards are contested across third-party sources; the 28±1 dBm here reflects Heltec's own current spec — verify against heltec.org before relying on it.)
Specifications
| Attribute | Value |
|---|---|
| Price | ~$30 (Heltec lists ~$29.90-$33.90 depending on date/variant; as of 2026-06-08) |
| MCU | nRF52840 |
| Radio | SX1262 + integrated power amplifier |
| TX Power | |
| GNSS | UC6580 - L1+L5, 6 constellations (GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC) |
| Display | 0.96″ color TFT (commonly 160×80 |
| Sleep Current | 12 µA |
| Bluetooth | BLE 5 + Bluetooth Mesh |
| Battery Connector | 1.25 mm lithium |
| Solar Input | 1.25 mm solar connector |
| MeshCore Support | Yes |
T096 vs. Heltec V4
| Feature | T096 | V4 | |
|---|---|---|---|
| TX Power | 28±1 dBm (Heltec, via PA) | ~22 dBm stock (contested; some sources cite up to ~27-28 dBm | |
| Price | ~$30 (as of 2026-06-08) | ~$17 - 20 (as of 2026-06-08) | |
| GPS | Yes (UC6580, L1+L5) | No | |
| Wi-Fi | No | Yes | |
| Sleep Current | 12 µA | Higher | |
| Best Role | Solar / remote / field | Indoor / USB-powered nodes |
BothRF deliveroutput is not identical RFbetween the two: the T096 reaches 28±1 dBm via its integrated PA, whereas the Heltec V4's stock output is around 22 dBm (higher on some PA variants — the exact figure is contested, so verify against heltec.org). Beyond raw output, but the T096's 12 µA sleep current and built-in GPS make it far more suitable for long-term solar-powered deploymentsdeployments, where the V4's Wi-Fi integration goes unused.
Target Use Cases
- Solar-powered relay nodes
- Remote repeaters (mountain tops, rural infrastructure)
- Portable field kits requiring GPS without an external module