Skip to main content

Mid-Range Devices

Mid-Range Devices

Mid-range devices ($25–25 - $50) add useful features: GPS, better displays, higher transmit power, lower power consumption, or more robust form factors.

Heltec V4 - $25–25 - $35

A direct upgrade over the V3. The V4 raises TX power to 28 dBm and adds a solar charging interface, making it well-suited for small solar-powered repeater builds. Uses the same ESP32-S3 + SX1262 combination as the V3.

  • TX power: 28 dBm
  • Solar input: Yes (dedicated solar charging circuit)
  • Display: OLED

LilyGo T-Beam - $35–35 - $45

  • MCU: ESP32
  • GPS: Built-in (Neo-6M or equivalent)
  • Battery: 18650 holder (cell not included)
  • Connector: SMA antenna

Heltec T114 - $30–30 - $45

Uses an nRF52840 rather than ESP32, which draws significantly less power. The 1.14" TFT colour display is a step up from OLED. Solar-ready. Best choice for a low-power personal node that also has a decent screen.

  • MCU: nRF52840
  • Display: 1.14" TFT colour
  • Power: Lower than ESP32 equivalents
  • Flashing: DFU (double-tap reset)

Wio Tracker L1 - $29.90

Bare board with OLED display and GPS. nRF52840-based. Good value if you plan to build it into a custom enclosure.

Wio Tracker L1 Lite - $27.90

The most affordable Wio option. No GPS. Otherwise similar to the L1. Good choice if position reporting is not needed.

SenseCAP T1000-E - $35–35 - $45

Credit-card sized device with IP65 weather resistance, GPS, and nRF52840. One of the most compact GPS-capable options available. Ships pre-assembled in a rugged housing - no enclosure work needed.

  • Form factor: 85 × 55 × 6.5mm (credit card size)
  • IP rating: IP65
  • GPS: Yes
  • MCU: nRF52840

Mid-Range Summary

DevicePriceMCUGPSDisplaySolar
Heltec V4$25–25 - $35ESP32-S3NoOLEDYes
LilyGo T-Beam$35–35 - $45ESP32YesOLEDNo
Heltec T114$30–30 - $45nRF52840NoTFT 1.14"Yes
Wio Tracker L1$29.90nRF52840YesOLEDNo
Wio Tracker L1 Lite$27.90nRF52840No - No
SenseCAP T1000-E$35–35 - $45nRF52840YesNoneNo