Prebuilt Solar Repeater Units
Prebuilt Solar Repeater Units
Prebuilt solar nodes take the complexity out of outdoor deployments. They arrive weather-rated, often pre-flashed, and ready to mount. The trade-off is higher cost compared to a DIY build.
RAK WisMesh Repeater — $129
IP67-rated enclosure with 5.2Ah battery and pre-flashed MeshCore repeater firmware. Designed specifically for unattended outdoor deployment. Mount it, point the solar panel, and it runs.
- IP rating: IP67
- Battery: 5.2Ah
- Firmware: MeshCore (pre-flashed)
- Solar: External panel required (sold separately)
RAK WisMesh Repeater Mini — $69
A smaller, lower-cost version of the WisMesh Repeater. IP65 rated with a 2000mAh battery. Good starting point for a solar site where you want a prebuilt option without the full Repeater cost.
SenseCAP Solar Node P1 — $69.90
Integrated solar panel in the housing. No external battery included — you add your own 18650 cells. Low entry cost if you already have cells.
SenseCAP Solar Node P1-Pro — $89.90
The community's top recommendation for outdoor MeshCore repeaters per RegionMesh. Includes built-in GPS, capacity for 4x 18650 cells, and an integrated solar panel. Ships with MeshCore firmware. The GPS enables position reporting from the repeater itself.
- GPS: Yes
- Battery capacity: 4x 18650 (cells not included)
- Solar: Integrated
- Firmware: MeshCore (pre-flashed)
- Community rating: "Best choice for outdoor MeshCore repeaters" — RegionMesh
Atlavox Beacon — $235.99
Atlavox Beacon Outpost — $269.99
Same hardware as the Beacon but comes pre-flashed and pre-configured, with an ALFA antenna included. Zero-setup deployment — unbox, mount, done.
PEAKmesh Solar Nodes — $99+
Community-built nodes rated for 30+ days of runtime. Available in birdhouse and tree-hang form factors — useful for natural environments where a standard enclosure would look out of place or draw attention.
Yeti Wurks Base Station — $99+
IP65-rated, pre-configured. Yeti Wurks also offers a solar kit ($150) that bundles the base station with a 5.5W solar panel — a convenient all-in-one purchase for a new solar site.
Seeed MeshCore Starter Kit — $132.80
Bundles a SenseCAP P1-Pro (solar node/repeater) with a Wio Tracker L1 Pro (handheld/carry device), both pre-flashed with MeshCore. The most convenient way to get both an infrastructure node and a personal device in one purchase.
Prebuilt Solar Node Comparison
| Device | Price | Battery | IP Rating | Solar Included | Pre-flashed | GPS |
|---|---|---|---|---|---|---|
| RAK WisMesh Repeater | $129 | 5.2Ah | IP67 | No | Yes | No |
| RAK WisMesh Repeater Mini | $69 | 2000mAh | IP65 | No | No | No |
| SenseCAP P1 | $69.90 | 18650 (DIY) | Yes | Yes | No | No |
| SenseCAP P1-Pro | $89.90 | 4x 18650 (DIY) | Yes | Yes | Yes | Yes |
| Atlavox Beacon | $235.99 | 5000mAh | IP67 | 5W ETFE | Yes | No |
| Atlavox Beacon Outpost | $269.99 | 5000mAh | IP67 | 5W ETFE | Yes (configured) | No |
| PEAKmesh Solar Nodes | $99+ | 30+ day rated | Yes | Yes | Yes | Varies |
| Yeti Wurks Base Station | $99+ | — | IP65 | Optional ($150 kit) | Yes | No |