Recently Updated Pages
Flashing MeshCore Firmware OTA: The Definitive Guide
Step-by-Step: OTA Update Over-the-air (OTA) updating lets you reflash a deployed MeshCore node; ...
JadeNode Build (~$50)
The JadeNode is one of CascadiaMesh's low-cost (~$50) DIY repeater designs, configured for the st...
MeshCore CLI Configuration
MeshCore nodes can be configured using two distinct CLI systems. The meshcore-cli Python tool dri...
T-Beam Build Guide (TTGO/LilyGO)
Overview The TTGO/LilyGO T-Beam is one of the most popular all-in-one LoRa mesh boards available....
LilyGo T-Beam Setup Guide
⚠ ANTENNA SAFETY - ALL DEVICES: Always connect an antenna before powering on or transmitting with...
LilyGo T-Deck Plus Setup Guide
⚠ ANTENNA SAFETY - ALL DEVICES: As good practice, always connect an antenna before powering on or...
Seeed Wio Tracker Setup Guide
⚠ ANTENNA SAFETY - ALL DEVICES: Always connect an antenna before powering on or transmitting with...
Heltec LoRa 32 Build Guide
Overview The Heltec LoRa 32 is a compact, low-cost development board combining an ESP32-family mi...
Flashing Repeater Firmware
MeshCore-capable LoRa boards typically ship without MeshCore firmware (blank, vendor test firmwar...
Reflashing and Factory Reset
When a MeshCore repeater becomes unreachable, misconfigured, or boot-loops, reflashing is the rec...
LilyGo T-Deck Setup Guide
⚠ ANTENNA SAFETY - GOOD PRACTICE: Always connect an antenna before powering on or transmitting wi...
Nano G2 Ultra Setup Guide
⚠ ANTENNA SAFETY - ALL DEVICES: Always connect an antenna (or a 50-ohm dummy load) before transmi...
Budget MeshCore Repeater: Under $60
Budget MeshCore Repeater: Under $60 Not every deployment calls for a weatherproof solar installat...
Station G2 Setup Guide
⚠ ANTENNA SAFETY - ALL DEVICES: Always connect a properly matched antenna before powering on any ...
Protocol Comparison Reference
This page provides a technical comparison between MeshCore and Meshtastic - the two most widely d...
RAK4631 WisBlock Build Guide
Overview The RAK WisBlock system is a modular hardware platform built around small snap-together ...
Flashing MeshCore Firmware
MeshCore firmware can be installed on supported hardware using two primary methods: the MeshCore ...
Flashing MeshCore Firmware
Flashing MeshCore Firmware MeshCore firmware can be installed via the web flasher (easiest), with...
MeshCore Firmware Types
MeshCore has three main deployable firmware roles — Companion, Repeater, and Room Server. (A comp...
Home Assistant & Grafana Integration
Home Assistant & Grafana Integration Once your Meshtastic node is publishing to an MQTT broker, t...