Recently Updated Pages
RAK4631 WisBlock Build Guide
Overview The RAK WisBlock system is a modular hardware platform built around small snap-together ...
Flashing MeshCore Firmware
MeshCore firmware can be installed on supported hardware using two primary methods: the MeshCore ...
Flashing MeshCore Firmware
Flashing MeshCore Firmware MeshCore firmware can be installed via the web flasher (easiest), with...
MeshCore Firmware Types
MeshCore has three main deployable firmware roles — Companion, Repeater, and Room Server. (A comp...
Home Assistant & Grafana Integration
Home Assistant & Grafana Integration Once your Meshtastic node is publishing to an MQTT broker, t...
MQTT Overview & Setup
Meshtastic MQTT Gateway Overview MQTT allows Meshtastic nodes to bridge the local LoRa mesh to th...
Setting Up a Meshtastic MQTT Gateway
Any Meshtastic device with a direct internet connection can act as an MQTT gateway. This includes...
Room Server Setup & Configuration
Step 1 - Flash Room Server Firmware Use the MeshCore web flasher at flasher.meshcore.io. Select y...
What is a Room Server?
What is a MeshCore Room Server? A Room Server is a store-and-forward bulletin board that runs dir...
Setting Up a Meshtastic MQTT-to-Internet Gateway
An MQTT gateway connects your Meshtastic mesh to the internet, enabling message delivery to non-L...
Dual Deployment: Repeater + Room Server
Dual Deployment: Separate Repeater and Room Server The recommended best practice for any fixed si...
Meshtastic MQTT Overview
Meshtastic's MQTT module extends a LoRa mesh network over the internet by bridging packets betwee...
Raspberry Pi MQTT Gateway Setup
What This Achieves The Meshtastic node acts as the MQTT gateway, bridging LoRa packets to an MQTT...
MQTT to Node-RED Integration
Node-RED is a browser-based visual programming tool built on Node.js, ideal for wiring together M...
Running a Self-Hosted MQTT Broker
Eclipse Mosquitto is the de-facto standard open-source MQTT broker, widely used with Meshtastic f...
Internet Bridging and MQTT
A MeshCore room server runs as firmware on a single LoRa node (typically nRF52840 or ESP32 hardwa...
Running Multiple Rooms
A MeshCore room server is a single node that hosts a single room. There is no multi-room mode: on...
Setting Channel Keys and Network Identity
Your channel configuration defines who can communicate on your mesh. Getting it right from the st...
Naming Conventions and Network Hygiene
Good naming conventions make the network easier to use, debug, and grow. Establish them early - r...
Handling Network Growth and Congestion
A Meshtastic network that works well with five nodes may behave poorly at fifty. Managing growth ...