EasySkyMesh: Third-Party Power-Optimized MeshCore Fork

Important clarification: EasySkyMesh is a third-party derivative project based on MeshCore firmware, maintained by IoTThinks at github.com/IoTThinks/EasySkyMesh. It is not an official MeshCore firmware variant and is not available through the official MeshCore flasher at flasher.meshcore.io.

What EasySkyMesh Is

EasySkyMesh is a community-developed fork of MeshCore that adds:

• Power optimization features for battery-constrained deployments
• Additional sensor integrations not yet in mainline MeshCore
• Experimental features the maintainer intends to contribute upstream to the official MeshCore project

Should You Use It?

For most users: no. Use official MeshCore firmware from flasher.meshcore.io for reliability, active support, and compatibility with the broader MeshCore community network.

EasySkyMesh may be worth evaluating if you:

• Have a specific sensor integration need not yet in mainline MeshCore
• Are comfortable tracking a community fork that may lag behind official releases
• Want to contribute to or test pre-upstream features

Official Firmware Alternative

For power optimization with official firmware, use the powersaving CLI command available in MeshCore repeater firmware v1.12.0+: powersaving on. This enables the official sleep/wake cycle without needing a third-party firmware.

Source: IoTThinks GitHub repository and official MeshCore repository. Verified 2026-05-03.